Development of a hybrid adsorbent for CO2 capture by the physicalmixture of Na-ZSM-5 zeolite and activated carbon

Autores

  • Jorge Arce Castro UFBA/PhD Student Autor
  • PhD. Student. Lourdes O. Galvão UFBA/PhD. Student Autor
  • Dr. Yanier S. Hechavarria UFBA/Postdoctoral researcher Autor
  • Dr. Tamille A. Souza UFBA/Postdoctoral researcher Autor
  • Dr. Karen P. Valverde UFBA/Professor Autor
  • Dr. Mauricio B. dos Santos UFBA/Professor Autor
  • Dr. Fernanda T. Cruz UFBA/Professor Autor
  • Dr. Raildo A. Fiuza Junior UFBA/Professor Autor
  • Dr. Artur José S. Mascarenhas UFBA/Professor Autor

Palavras-chave:

Hybrid materials, CO2 adsorption, TSA, physical mixture

Resumo

 In this work, we developed hybrid materials for CO₂ capture via temperature swing adsorption (TSA). These hybrids were produced by physically mixing activated carbon obtained from yellow mombin seeds and Na-ZSM-5 zeolite synthesized through a sustainable route (in three distinct compositions). The materials were characterized by SEM, XRD, TGA,
and textural analysis. The evaluation of CO₂ adsorption was performed by thermogravimetric analysis. The H-30Z/70AC hybrid adsorbent (30% zeolite/70% activated carbon) exhibited the best performance, with an adsorption capacity of 71.67 mg g⁻ ¹. Additionally, we studied the CO₂ /N₂ selectivity at 1 bar and 30°C, obtaining values of 4.6 for both H-70Z/30AC and H-50Z/50AC and 5.0 for H-30Z/70AC adsorbents, respectively, considering a flow rate of 100 mL min⁻ ¹ of a gas mixture of CO2:N2 in a 1:1 ratio

Referências

1. Y. Liu; W. Zhang; T. J. Pinnavaia. J. Am. Chem. Soc. 2000, 122, 8791.

2. H. Kosslick; G. Lischke; G. Walther; W. Storek; A. Martin; R. Fricke. Microporous Mater. 1997, 9, 13–33.

3. T. Prasomsri; W. Jiao; S.Z. Weng; J. Garcia Martinez; Chem. Commun. 2015, 51, 8900–8911.

4. Y. Lui; T. J. Pinnavala. Chem. Matter. 2002, 14, 3.

5. S. Ramírez; J. M. Domínguez; L. A. García; M. A. Mantilla; C. A. Flores; J. Salmones; D. Jerónimo. Petrol. Sci. Technol. 2004, 22, 119-127.

6. P.F. Corregidor, P.M. Cuesta, D.E. Acosta, H.A. Destéfanis, Appl. Catal. A Gen. 2019, 587, 117262.

7. M.B. dos Santos, K.C. Vianna, H.O. Pastore, H.M. Andrade, A.J. Mascarenhas. Micropor. Mesopor. Mat. 2020, 306, 110413.

8. H.O. Pastore, M. Munsignatti, D.R. Bittencourt, M.M. Rippel. Micropor. Mesopor. Mat. 1999, 32, 211.

9. J.C. Vartuli; W.J. Roth; J.S. Beck; S.B. McCullen; C.T. Kresge. in Synthesis, Springer Berlin Heidelberg, 2001, 97.

10. N. La-Salvia; J.J. Lovón-Quintana; A.S.P. Lovón; G.P. Valença. Mater. Res. 2017, 20, 1461.

11. J.M.D. Cónsul; C.A. Peralta; E.V. Benvenutti; J.A. Ruiz; H.O. Pastore; I.M. Baibich. J. Mol. Catal. A: Chem. 2006, 246, 33.

12. J. Rouquerol; F. Rodríguez-Reinoso; K.S.W. Sing. Characterization of Porous Solids III, Elsevier, Amsterdam, 1994.

Downloads

Publicado

03-11-2025

Edição

Seção

Síntese e caracterização de catalisadores e adsorventes